Home
Arne Skauge's picture

Arne Skauge

Professor, Energi Simulation Chair in EOR
  • E-mailArne.Skauge@uib.no
  • Phone+47 55 58 33 58+47 950 76 443
  • Visitor Address
    Realfagbygget
    Allegaten 41
    5007 Bergen
    Room 
    4056
  • Postal Address
    Postboks 7803
    5020 BERGEN
Academic article
  • Show author(s) 2021. The Impact of Rheology on Viscous Oil Displacement by Polymers Analyzed by Pore-Scale Network Modelling. Polymers. 1259.
  • Show author(s) 2021. Multi-physics approach to modelling near-miscible CO2-WAG process. Journal of Petroleum Science and Engineering. 1-14.
  • Show author(s) 2021. Analysis and Simulation of Polymer Injectivity Test in a High Temperature High Salinity Carbonate Reservoir . Polymers. 1765-1786.
  • Show author(s) 2020. Qualification of New Methods for Measuring In-Situ Rheology of Non-Newtonian Fluids in Porous Media. Polymers. 1-13.
  • Show author(s) 2020. Polymer Injectivity Test Design Using Numerical Simulation. Polymers. 23 pages.
  • Show author(s) 2020. On the Modelling of Immiscible Viscous Fingering in Two Phase Flow in Porous Media. Transport in Porous Media. 331-359.
  • Show author(s) 2020. Numerical study of CO2 injection and the role of viscous crossflow in near-miscible CO2-WAG. Journal of Natural Gas Science and Engineering. 1-15.
  • Show author(s) 2020. Multi-physics approach to modelling near-miscible CO2-WAG process. Journal of Petroleum Science and Engineering. 108165.
  • Show author(s) 2020. Improving Coarse-Scale Simulation Models with a Dual-Porosity Dual-Permeability Upscaling Technique and a Near-Well Approach. Journal of Petroleum Science and Engineering. 108132.
  • Show author(s) 2020. Foam dynamics in limestone carbonate cores. ACS Omega. 23604-23612.
  • Show author(s) 2020. Foam Generation, Propagation and Stability in Porous Medium. Transport in Porous Media. 5-21.
  • Show author(s) 2020. Effect of initial water flooding on the performance of polymer flooding for heavy oil production. Oil & gas science and technology. 1-17.
  • Show author(s) 2019. Polymer Injectivity: Investigation of Mechanical Degradation of Enhanced Oil Recovery Polymers Using In-Situ Rheology. Energies.
  • Show author(s) 2018. Polymer flow in porous media: Relevance to Enhanced Oil Recovery. Colloids and Interfaces. 27 pages.
  • Show author(s) 2018. Impact of mechanical degradation on polymer injectivity in porous media. Polymers. 1-23.
  • Show author(s) 2017. Polymer Flooding at Adverse Mobility Ratio – Acceleration of Oil Production by Crossflow into Water Channels. Energy & Fuels. 5948-5958.
  • Show author(s) 2017. Computation of polymer in-situ rheology using direct numerical simulation. Journal of Petroleum Science and Engineering. 92-102.
  • Show author(s) 2016. Re-entrant transition of aluminum-crosslinked partially hydrolyzed polyacrylamide in a high salinity solvent by rheology and NMR. Journal of Applied Polymer Science.
  • Show author(s) 2015. Mechanisms of Non-Newtonian Polymer Flow through Porous Media Using Navier-Stokes Approach. Journal of Dispersion Science and Technology. 310-325.
  • Show author(s) 2015. Effect of porous media properties on the onset of polymer extensional viscosity. Journal of Petroleum Science and Engineering. 483-495.
  • Show author(s) 2014. Similarities and differences of low salinity polymer and low salinity LPS (Linked Polymer Solutions) for enhanced oil recovery. Journal of Dispersion Science and Technology. 1656-1664.
  • Show author(s) 2014. Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process. Journal of Dispersion Science and Technology. 551-555.
  • Show author(s) 2014. Properties of N2- and CO2- Foams as a Function of Pressure. Journal of Petroleum Science and Engineering. 72-80.
  • Show author(s) 2014. Nanoparticles for enhanced oil recovery: influence of pH on aluminum-cross-linked partially hydrolyzed polyacrylamide-investigation by rheology and NMR. Energy & Fuels. 2343-2351.
  • Show author(s) 2014. Nanoparticles for enhanced oil recovery: Phase transition of aluminum-cross-linked partially hydrolyzed polyacrylamide under low-salinity conditions by rheology and nuclear magnetic resonance. Energy & Fuels. 2948-2958.
  • Show author(s) 2014. Modeling of heavy nitrate corrosion in anaerobe aquifer injection water biofilm: A case study in a flow rig. Environmental Science and Technology. 8627-8635.
  • Show author(s) 2014. Foam performance in low permeability laminated sandstones. Energy & Fuels. 803-815.
  • Show author(s) 2014. A strategy for low cost, effective surfactant injection. Journal of Petroleum Science and Engineering. 8-14.
  • Show author(s) 2013. Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process. Journal of Dispersion Science and Technology.
  • Show author(s) 2013. Evaluation of representative elementary volume for a vuggy carbonate rock—Part: Porosity, permeability, and dispersivity. Journal of Petroleum Science and Engineering. 36-47.
  • Show author(s) 2013. Evaluation of representative elementary volume for a vuggy carbonate rock – Part II: Two-phase flow. Journal of Petroleum Science and Engineering. 48-60.
  • Show author(s) 2013. Enhanced Oil Recovery (EOR) by Combined Low Salinity Water/Polymer Flooding. Energy & Fuels. 1223-1235.
  • Show author(s) 2012. Connectivity in vuggy carbonates, new experimental methods and applications. Transport in Porous Media. 561-575.
  • Show author(s) 2011. Viscosity and Retention of Sulfonated Polyacrylamide Polymers at High Temperature. Journal of Applied Polymer Science. 3623-3629.
  • Show author(s) 2011. Network Modeling of EOR Processes: A Combined Invasion Percolation and Dynamic Model for Mobilization of Trapped Oil. Transport in Porous Media. 357-382.
  • Show author(s) 2011. Effect of crude oil ageing on low salinity and low salinity surfactant flooding. Journal of Petroleum Science and Engineering. 220-227.
  • Show author(s) 2010. Viscosity Study of Salt Tolerant Polymers. Journal of Applied Polymer Science. 1551-1557.
  • Show author(s) 2010. Combined low salinity brine injection and surfactant flooding in mixed-wet sandstone cores. Energy & Fuels. 3551-3559.
  • Show author(s) 2009. Constructing Three-Phase Capillary Pressure Functions by Parameter Matching Using a Modified Ensemble Kalman Filter. Communications in Computational Physics. 24-48.
  • Show author(s) 2009. A New Polymer Application for North Sea Reservoirs. SPE Reservoir Evaluation and Engineering. 427-432.
  • Show author(s) 2008. Formation of colloidal dispersion gels from aqueous polyacrylamide solutions. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 504-511.
  • Show author(s) 2007. Theoretical and experimental evidence of different wettability classes. Journal of Petroleum Science and Engineering. 321-333.
  • Show author(s) 2007. Fluid flow properties for different classes of intermediate wettability as studied by network modelling. Transport in Porous Media. 127-146.
  • Show author(s) 2007. Absolute pore size distribution from NMR. Diffusion Fundamentals. 4.1-4.15.
  • Show author(s) 2006. Effect of surfactant structure on foam-oil interactions - Comparing fluorinated surfactant and alpha olefin sulfonate in static foam tests. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 105-112.
  • Show author(s) 2005. Foam-oil interactions analyzed by static foam tests. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 189-198.
  • Show author(s) 2005. Centre for Integrated Petroleum Research - Research activities with emphasis on fluid flow in fault zones. Norsk Geologisk Tidsskrift. 63-71.
  • Show author(s) 2002. Foam for Gas Mobility Control in the Snorre Field: The FAWAG Project. SPE Reservoir Evaluation and Engineering. 317-323.
  • Show author(s) 2001. Review of WAG Field Experience. SPE Reservoir Evaluation and Engineering. 97-106.
  • Show author(s) 1999. Phase Behavior and Salt Partitioning in Two-and Three-Phase Anionic Surfactant Microemulsion Systems: Part 1, Phase Behavior as a Function of Temperature. Journal of Colloid and Interface Science. 201-215.
  • Show author(s) 1999. Phase Behavior and Salt Partitioning in Two- and Three Phase Anionic Surfactant Microemulsion Systems: Part 2, Partitioning of Salt. Journal of Colloid and Interface Science. 216-225.
  • Show author(s) 1999. Partition Coefficients and Interfacial Activity for Polar Components in Oil-Water Model Systems. Journal of Colloid and Interface Science. 33-41.
  • Show author(s) 1999. Effect of Polar Organic Components on Wettability as Studied by Adsorption and Contact Angles. Journal of Petroleum Science and Engineering. 131-144.
  • Show author(s) 1998. Methodology for Numerical Simulation with Cycle-Dependent Relative Permeabilities. SPE Journal. 163-173.
  • Show author(s) 1996. A Foam Pilot Test aimed at reducing Gas Inflow in a Production Well at the Oseberg Field. Petroleum Geoscience. 125-132.
  • Show author(s) 1992. Three-Phase Microemulsion Relative Permeability-Experimental and Theoretical Considerations. Journal of Petroleum Science and Engineering. 105-116.
  • Show author(s) 1992. Optimization of a Surfactant Flooding Process by Core Flood Experiments. Journal of Petroleum Science and Engineering. 117-130.
  • Show author(s) 1992. Evaluation of the Potential Application of the WAG Process in a North Sea Reservoir. Revue de l'Institut français du pétrole. 81-93.
  • Show author(s) 1990. Imaging Fluid Saturation Development in Long Core Flood Experiments. SPE Formation Evaluation. 406-412.
  • Show author(s) 1990. Effect of Pressure and Temperature on the Phase Behavior of Microemulsions. SPE Reservoir Evaluation and Engineering. 601-608.
  • Show author(s) 1987. Adsorption of Surfactants on Kaolinite. Progress in Colloid and Polymer Science. 182.
  • Show author(s) 1986. Ultralow Interfacial Tension as a Function of Pressure. Journal of Dispersion Science and Technology. 563-579.
  • Show author(s) 1986. Changes in Partial Molar Volume and Isentropic Partial Molar Compressibility of Self-Association of Purine and Caffeine in Aqueous Solution at 1-1600 Bar. Journal of Solution Chemistry.
  • Show author(s) 1985. Specific Heat Capacities of Bitumen and Heavy oils, Reservoir Minerals, Clays, Dehydrated Clays, Asphaltenes, and Cokes. AOSTRA Journal of Research. 163-175.
  • Show author(s) 1984. Changes in Partial Molar Volumes and Isentropic Partial Molar Compressibilities of Stacking of some Nucleobases and Nucleosides in water at 298.15 K. Journal of Physical Chemistry A. 6350-6353.
  • Show author(s) 1983. Surface Tensions and Micellization of Cyclohexanealkyl carboxylic acids and their Sodium Salts. Journal of Physical Chemistry A. 2398-2401.
  • Show author(s) 1983. Studies of stacking in AMP and its Pd(II) Complexes by Ultrasonic Velocity Measurements. Acta Chemica Scandinavica. 47-51.
  • Show author(s) 1983. Specific Heats of Clay mineral; Sodium and Calcium Kaolinites, Sodium and Calcium Montmorillonites, Illite and Attapulgite. Thermochimica Acta. 139-145.
  • Show author(s) 1983. Specific Heat Capacities of Minerals from Oil Sands and Heavy Oil Deposits. Thermochimica Acta. 291-297.
  • Show author(s) 1982. Specific heats of Athabasca Oil Sands and Components. Journal of Canadian Petroleum Technology. 28-32.
  • Show author(s) 1979. The effect of added NaCl on Sodium Nonanoate Micelles. Acta Chemica Scandinavica. 235-239.
  • Show author(s) 1979. Effect of Pressure and Temperature on the Partial Molal Volume and Compressibility of the Sodium Decanoate Micelles. Journal of Colloid and Interface Science. 59-67.
  • Show author(s) 1978. Partial molal volumes and compressibilities of the homologous series of sodium alkylcarboxylates in aqueous solution. Journal of Colloid and Interface Science. 240-246.
Report
  • Show author(s) 2015. POLYMER INJECTIVITY – PHASE II. .
Lecture
  • Show author(s) 2021. Upscaling of Near-Miscible WAG in Heterogeneous Reservoirs.
  • Show author(s) 2021. Understanding in-situ Polymer Rheology from Laboratory Studies, Rheological Theory, and Field Test Results .
  • Show author(s) 2021. Miscible Gas Modelling.
  • Show author(s) 2021. Immiscible WAG modelling.
  • Show author(s) 2015. Summer School on EOR in carbonate reservoirs.
  • Show author(s) 2014. New Technologies developed at CIPR.
  • Show author(s) 2012. CO2-foam.
  • Show author(s) 2011. Properties of CO2-Foam as a Function of Pressure.
Academic lecture
  • Show author(s) 2021. Differences in the Upscaling Procedure for Compositional Reservoir Simulations of Immiscible and Miscible Gas flooding.
  • Show author(s) 2020. X-ray CT Investigation Of Displacement Mechanisms For Heavy Oil Recovery By Low Concentration HPAM Polymers.
  • Show author(s) 2020. Use of Dynamic Pore Network Modeling to Improve our Understanding of Experimental Observations in Viscous Oil Displacement by Polymers.
  • Show author(s) 2020. Polymer Stability at Harsh Temperature and Salinity Conditions.
  • Show author(s) 2020. Low Polymer Retention Opens For Field Implementation Of Polymer Flooding In High Salinity Carbonate Reservoirs.
  • Show author(s) 2020. Impacts of Gas Trapping and Capillarity on Oil Recovery by Near-Miscible CO2-WAG.
  • Show author(s) 2019. The Analysis Of Near-Miscible CO2-WAG Displacements: The Distinction Between Compositional And Interfacial Tension Effects.
  • Show author(s) 2019. Preparations For Foam Gas Shut Off In Carbonate Reservoirs.
  • Show author(s) 2019. Polymer Injectivity: Influence of permeability in the Flow of EOR Polymers in Porous Media.
  • Show author(s) 2019. Numerical Study of Polymer Flow in Porous Media using Dynamic Pore Network Modelling.
  • Show author(s) 2019. Modelling the Transition between Immiscible and Miscible WAG.
  • Show author(s) 2019. Mobilization of By-Passed Oil by Viscous Crossflow in EOR Processes.
  • Show author(s) 2019. Extending polymer flooding towards high-temperature and high-salinity carbonate reservoirs.
  • Show author(s) 2019. Analysis and Simulation of Polymer Injectivity.
  • Show author(s) 2018. Enhanced Oil Recovery by Polymer Flooding: Optimizing Polymer Injectivity.
  • Show author(s) 2016. Simulation of Complex Composite EOR Processes at Lab and Field Scale.
  • Show author(s) 2016. Radial and Linear Polymer Flow - Influence on Injectivity.
  • Show author(s) 2016. Modeling Hybrid Chemical EOR Processes.
  • Show author(s) 2015. Study in-situ rheology of polymer solution in comparison with bulk rheology using direct numerical simulation.
  • Show author(s) 2015. Relative Permeability Functions for Tertiary Polymer Flooding.
  • Show author(s) 2015. Relative Permeability Functions for Tertiary Polymer Flooding.
  • Show author(s) 2015. Modelling of Hybrid Waterflood EOR Processes.
  • Show author(s) 2015. Influence of Polymer Structural Conformation and Phase Behaviour on In-situ Viscosity.
  • Show author(s) 2015. Course at EAGE conference titled Advances in Polymer flooding technology.
  • Show author(s) 2015. Comparison of History-Matched Water Flood, Tertiary Polymer Flood Relative Permeabilities and Evidence of Hysteresis During Tertiary Polymer Flood in Very Viscous Oils.
  • Show author(s) 2014. Status of Fluid Flow Mechanisms for Miscible and Immiscible WAG.
  • Show author(s) 2014. Status and advances within EOR modeling.
  • Show author(s) 2014. Simulation of polymer flooding in heavy oil reservoirs.
  • Show author(s) 2014. Polymer flooding technology.
  • Show author(s) 2014. Polymer Flood at Adverse Mobility Ratio in 2D Flow by X-ray Visualization.
  • Show author(s) 2014. Modelling of hybrid EOR processes.
  • Show author(s) 2014. Mechanisms of low salinity waterflooding.
  • Show author(s) 2014. Low Salinity Polymer Flooding (Best of EAGE IOR St. Petersburg).
  • Show author(s) 2014. Displacement Mechanisms and Polymer Flooding.
  • Show author(s) 2013. Supercritical CO2-Foam - The Importance of CO2 Density on Foams Performance.
  • Show author(s) 2010. Simulation of Low salinity waterflooding and combined lowsal and surfactant injection.
  • Show author(s) 2010. Representative elementary volume for petrophysical properties of vuggy carbonates.
  • Show author(s) 2010. Relationship between surfactant injectivity, phase behavior and retention in porous medium.
  • Show author(s) 2010. Propagation of colloidal dispersion gels (CDG) in laboratory core floods.
  • Show author(s) 2010. Propagation of Colloidal Dispersion Gels (CDG) in Laboratory Corefloods, paper SPE 129927.
  • Show author(s) 2010. Nanosized particles for EOR, paper SPE 129933.
  • Show author(s) 2010. Nano-sized particles for EOR.
  • Show author(s) 2010. Modified synthetic polymers for high salinity and high temperature.
  • Show author(s) 2010. Modeling and statistical analysis of miscible displacement using 1D NMR imaging.
  • Show author(s) 2010. Mechanistic modelling of EOR processes.
  • Show author(s) 2010. Experimental results of low salinity waterflooding combined with surfactant flooding.
  • Show author(s) 2010. Experimental 2D-study of unstable displacements.
  • Show author(s) 2009. Static and Dynamic Adsorption of Salt Tolerant Polymers.
  • Show author(s) 2007. Rheology of microemulsions.
  • Show author(s) 2007. Progress in Immiscible WAG modelling.
  • Show author(s) 2007. Probing the connectivity amongst pores within 1,5” rock core plugs.
  • Show author(s) 2007. Fluid flow properties of different carbonate pore classes correlations to oil recovery.
  • Show author(s) 2007. Features concerning capillary pressure and the effect on two-phase and three-phase flow.
  • Show author(s) 2007. Characterisation of vuggy carbonate.
  • Show author(s) 2007. A rheological study of new generation of sulfonated polyacrylamides as a function of salinity.
  • Show author(s) 2006. Measuring Wettability from Brine T2 Distributions in the Presence of an Inert Mineral Oil.
  • Show author(s) 1990. The Effect of Interfacial Tension on Gas Gravity Drainage.
  • Show author(s) 1990. Capillary Number Relations for Some North Sea Reservoir Sandstones.
  • Show author(s) 1989. Three Phase Relative Permeabilities in Brine - Oil - Microemulsion Systems.
  • Show author(s) 1989. Preparation for a Chemical Flooding Pilot in The Oseberg Field, proceedings page 409-419.
  • Show author(s) 1989. Phase Behavior and Solution Properties of Ethoxylated Anionic Surfactants, (paper SPE 18499).
  • Show author(s) 1988. Imaging Fluid Saturation Development in Long Core Flood Experiments (SPE 17438).
  • Show author(s) 1988. Dynamic Fluid Saturation Profiles in the Analysis of Surfactant Core Displacement (SPE 17347).
  • Show author(s) 1987. Adsorption on mineral particles - Sodium dodecyl sulfate and 1-butanol from microemulsions.
  • Show author(s) 1986. Valg av surfaktanter for EOR.
  • Show author(s) 1986. The Effect of Pressure and Temperature on the Phase Behavior of Microemulsions.
Masters thesis
  • Show author(s) 2018. Simulation of Low Salinity Surfactant Polymer Flooding.
  • Show author(s) 2015. Simulation of Low Salinity Waterflooding and Hybrid EOR.
  • Show author(s) 2015. Simulation of Enhanced Heavy Oil Recovery: History Match of waterflooding and Polymer injection at Adverse Mobility Ratio.
  • Show author(s) 2015. Modelling of Waterflood Hybrid EOR.
  • Show author(s) 2015. History Match of Laboratory Experiments on Low Salinity and Hybrid EOR.
  • Show author(s) 2015. Grid Sensitivity Simulation of Low Salinity and Polymer flooding.
  • Show author(s) 2009. Simulering og Analyse av 3-fase Strømningseksperimenter.
  • Show author(s) 2009. Simulering av flerfasestrømning i porøst medium.
  • Show author(s) 2009. Pore-scale Reconstruction and Network Modeling of Carbonate Material.
  • Show author(s) 2009. Eksperimentell studie av vannbasert EOR i karbonatreservoarer.
  • Show author(s) 2009. Effekt av permeabilitetsvariasjon på vann- olje strømning.
  • Show author(s) 2008. Water-flood Efficiency for different Pore Classes in Carbonate Reservoirs.
  • Show author(s) 2006. Reservoir Simulation for Transition Zone Reservoirs.
  • Show author(s) 2005. Eksperimentelt studie av oljeutvinning i utvalgt kjernemateriale med ulike karbonat poreklasser.
Doctoral dissertation
  • Show author(s) 2021. Polymer Injectivity, Experimental Studies of Flow in Porous Media for EOR Polymers.
  • Show author(s) 2020. Mechanistic Modelling of Radial Polymer Flow in Porous Media .
  • Show author(s) 2018. Low Salinity Surfactant Flooding in Sandstone Cores.
  • Show author(s) 2017. Modeling of Polymer Flooding at Adverse Mobility Ratio.
  • Show author(s) 2015. Pore Scale Modeling of Polymer Flow Using the Navier-Stokes Approach.
  • Show author(s) 2015. Experimental Studies of N2- and CO2-Foam Properties in Relation to Enhanced Oil Recovery Applications.
  • Show author(s) 2014. Enhanced Oil Recovery by Combined Low Salinity Water and Polymer Flooding.
  • Show author(s) 2012. Mechanistic Network Modeling of Water-based Enhanced Oil Recovery Method.
  • Show author(s) 2011. Multiphase Flow in Porous Media with Emphasis on CO2 Sequestration.
  • Show author(s) 2011. Characterisation and Representative Elementary Volume for a Vuggy Carbonate Rock.
  • Show author(s) 2009. Waterflood efficiency and single-phase flow properties ofcarbonate porous media.
  • Show author(s) 2009. Network Modelling of Multi-Phase Flow in Porous Media.
Academic chapter/article/Conference paper
  • Show author(s) 1990. Adsorption of Sodium Dodecyl Sulfate and 1-Butanol on Solid Aluminium Oxide. 8 pages.
Poster
  • Show author(s) 2015. Wettability and Oil Recovery by Polymer and Polymer Particles.
  • Show author(s) 2015. Heavy nitrate corrosion in anarobe aquifer injection water biofilm: Process modeling.
  • Show author(s) 2012. Wettability and Oil Recovery by Low Salinity Injection.
  • Show author(s) 2006. Absolute Pore Size Distribution from NMR.

More information in national current research information system (CRIStin)