Arne Skauges bilde

Arne Skauge

Professor, Energi Simulation Chair in EOR
  • E-postArne.Skauge@uib.no
  • Telefon+47 55 58 33 58+47 950 76 443
  • Besøksadresse
    Allegaten 41
    5007 Bergen
  • Postadresse
    Postboks 7803
    5020 BERGEN
Vitenskapelig artikkel
  • 2020. Qualification of New Methods for Measuring In-Situ Rheology of Non-Newtonian Fluids in Porous Media. Polymers. 452-465.
  • 2020. Polymer Injectivity Test Design Using Numerical Simulation. Polymers. 23 sider.
  • 2020. On the Modelling of Immiscible Viscous Fingering in Two Phase Flow in Porous Media. Transport in Porous Media. 331-359.
  • 2020. Numerical Study of CO2 injection and the Role of Viscous Crossflow in Near-Miscible CO2-WAG. Journal of Natural Gas Science and Engineering. 103112.
  • 2020. Foam dynamics in limestone carbonate cores. ACS Omega. 23604-23612.
  • 2020. Foam Generation, Propagation and Stability in Porous Medium. Transport in Porous Media. 5-21.
  • 2020. Effect of initial water flooding on the performance of polymer flooding for heavy oil production. Oil & gas science and technology. 1-11.
  • 2019. Polymer Injectivity: Investigation of Mechanical Degradation of Enhanced Oil Recovery Polymers Using In-Situ Rheology. Energies.
  • 2018. Polymer flow in porous media: Relevance to Enhanced Oil Recovery. Colloids and Interfaces. 27 sider.
  • 2018. Impact of mechanical degradation on polymer injectivity in porous media. Polymers. 1-23.
  • 2017. Polymer Flooding at Adverse Mobility Ratio – Acceleration of Oil Production by Crossflow into Water Channels. Energy & Fuels. 5948-5958.
  • 2017. Computation of polymer in-situ rheology using direct numerical simulation. Journal of Petroleum Science and Engineering. 92-102.
  • 2016. Re-entrant transition of aluminum-crosslinked partially hydrolyzed polyacrylamide in a high salinity solvent by rheology and NMR. Journal of Applied Polymer Science.
  • 2015. Mechanisms of Non-Newtonian Polymer Flow through Porous Media Using Navier-Stokes Approach. Journal of Dispersion Science and Technology. 310-325.
  • 2015. Effect of porous media properties on the onset of polymer extensional viscosity. Journal of Petroleum Science and Engineering. 483-495.
  • 2014. Similarities and differences of low salinity polymer and low salinity LPS (Linked Polymer Solutions) for enhanced oil recovery. Journal of Dispersion Science and Technology. 1656-1664.
  • 2014. Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process. Journal of Dispersion Science and Technology. 551-555.
  • 2014. Properties of N2- and CO2- Foams as a Function of Pressure. Journal of Petroleum Science and Engineering. 72-80.
  • 2014. Nanoparticles for enhanced oil recovery: influence of pH on aluminum-cross-linked partially hydrolyzed polyacrylamide-investigation by rheology and NMR. Energy & Fuels. 2343-2351.
  • 2014. Nanoparticles for enhanced oil recovery: Phase transition of aluminum-cross-linked partially hydrolyzed polyacrylamide under low-salinity conditions by rheology and nuclear magnetic resonance. Energy & Fuels. 2948-2958.
  • 2014. Modeling of heavy nitrate corrosion in anaerobe aquifer injection water biofilm: A case study in a flow rig. Environmental Science and Technology. 8627-8635.
  • 2014. Foam performance in low permeability laminated sandstones. Energy & Fuels. 803-815.
  • 2014. A strategy for low cost, effective surfactant injection. Journal of Petroleum Science and Engineering. 8-14.
  • 2013. Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process. Journal of Dispersion Science and Technology.
  • 2013. Evaluation of representative elementary volume for a vuggy carbonate rock—Part: Porosity, permeability, and dispersivity. Journal of Petroleum Science and Engineering. 36-47.
  • 2013. Evaluation of representative elementary volume for a vuggy carbonate rock – Part II: Two-phase flow. Journal of Petroleum Science and Engineering. 48-60.
  • 2013. Enhanced Oil Recovery (EOR) by Combined Low Salinity Water/Polymer Flooding. Energy & Fuels. 1223-1235.
  • 2012. Connectivity in vuggy carbonates, new experimental methods and applications. Transport in Porous Media. 561-575.
  • 2011. Viscosity and Retention of Sulfonated Polyacrylamide Polymers at High Temperature. Journal of Applied Polymer Science. 3623-3629.
  • 2011. Network Modeling of EOR Processes: A Combined Invasion Percolation and Dynamic Model for Mobilization of Trapped Oil. Transport in Porous Media. 357-382.
  • 2011. Effect of crude oil ageing on low salinity and low salinity surfactant flooding. Journal of Petroleum Science and Engineering. 220-227.
  • 2010. Viscosity Study of Salt Tolerant Polymers. Journal of Applied Polymer Science. 1551-1557.
  • 2010. Combined low salinity brine injection and surfactant flooding in mixed-wet sandstone cores. Energy & Fuels. 3551-3559.
  • 2009. Constructing Three-Phase Capillary Pressure Functions by Parameter Matching Using a Modified Ensemble Kalman Filter. Communications in Computational Physics. 24-48.
  • 2009. A New Polymer Application for North Sea Reservoirs. SPE Reservoir Evaluation and Engineering. 427-432.
  • 2008. Formation of colloidal dispersion gels from aqueous polyacrylamide solutions. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 504-511.
  • 2007. Theoretical and experimental evidence of different wettability classes. Journal of Petroleum Science and Engineering. 321-333.
  • 2007. Fluid flow properties for different classes of intermediate wettability as studied by network modelling. Transport in Porous Media. 127-146.
  • 2007. Absolute pore size distribution from NMR. Diffusion Fundamentals. 4.1-4.15.
  • 2006. Effect of surfactant structure on foam-oil interactions - Comparing fluorinated surfactant and alpha olefin sulfonate in static foam tests. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 105-112.
  • 2005. Foam-oil interactions analyzed by static foam tests. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 189-198.
  • 2005. Centre for Integrated Petroleum Research - Research activities with emphasis on fluid flow in fault zones. Norsk Geologisk Tidsskrift. 63-71.
Faglig foredrag
  • 2015. Summer School on EOR in carbonate reservoirs.
  • 2014. New Technologies developed at CIPR.
  • 2012. CO2-foam.
  • 2011. Properties of CO2-Foam as a Function of Pressure.
Vitenskapelig foredrag
  • 2020. X-ray CT Investigation Of Displacement Mechanisms For Heavy Oil Recovery By Low Concentration HPAM Polymers.
  • 2020. Use of Dynamic Pore Network Modeling to Improve our Understanding of Experimental Observations in Viscous Oil Displacement by Polymers.
  • 2020. Polymer Stability at Harsh Temperature and Salinity Conditions.
  • 2020. Low Polymer Retention Opens For Field Implementation Of Polymer Flooding In High Salinity Carbonate Reservoirs.
  • 2020. Impacts of Gas Trapping and Capillarity on Oil Recovery by Near-Miscible CO2-WAG.
  • 2019. The Analysis Of Near-Miscible CO2-WAG Displacements: The Distinction Between Compositional And Interfacial Tension Effects.
  • 2019. Preparations For Foam Gas Shut Off In Carbonate Reservoirs.
  • 2019. Polymer Injectivity: Influence of permeability in the Flow of EOR Polymers in Porous Media.
  • 2019. Numerical Study of Polymer Flow in Porous Media using Dynamic Pore Network Modelling.
  • 2019. Modelling the Transition between Immiscible and Miscible WAG.
  • 2019. Mobilization of By-Passed Oil by Viscous Crossflow in EOR Processes.
  • 2019. Extending polymer flooding towards high-temperature and high-salinity carbonate reservoirs.
  • 2019. Analysis and Simulation of Polymer Injectivity.
  • 2018. Enhanced Oil Recovery by Polymer Flooding: Optimizing Polymer Injectivity.
  • 2016. Simulation of Complex Composite EOR Processes at Lab and Field Scale.
  • 2016. Radial and Linear Polymer Flow - Influence on Injectivity.
  • 2016. Modeling Hybrid Chemical EOR Processes.
  • 2015. Study in-situ rheology of polymer solution in comparison with bulk rheology using direct numerical simulation.
  • 2015. Relative Permeability Functions for Tertiary Polymer Flooding.
  • 2015. Relative Permeability Functions for Tertiary Polymer Flooding.
  • 2015. Modelling of Hybrid Waterflood EOR Processes.
  • 2015. Influence of Polymer Structural Conformation and Phase Behaviour on In-situ Viscosity.
  • 2015. Course at EAGE conference titled Advances in Polymer flooding technology.
  • 2015. Comparison of History-Matched Water Flood, Tertiary Polymer Flood Relative Permeabilities and Evidence of Hysteresis During Tertiary Polymer Flood in Very Viscous Oils.
  • 2014. Status of Fluid Flow Mechanisms for Miscible and Immiscible WAG.
  • 2014. Status and advances within EOR modeling.
  • 2014. Simulation of polymer flooding in heavy oil reservoirs.
  • 2014. Polymer flooding technology.
  • 2014. Polymer Flood at Adverse Mobility Ratio in 2D Flow by X-ray Visualization.
  • 2014. Modelling of hybrid EOR processes.
  • 2014. Mechanisms of low salinity waterflooding.
  • 2014. Low Salinity Polymer Flooding (Best of EAGE IOR St. Petersburg).
  • 2014. Displacement Mechanisms and Polymer Flooding.
  • 2013. Supercritical CO2-Foam - The Importance of CO2 Density on Foams Performance.
  • 2010. Simulation of Low salinity waterflooding and combined lowsal and surfactant injection.
  • 2010. Representative elementary volume for petrophysical properties of vuggy carbonates.
  • 2010. Relationship between surfactant injectivity, phase behavior and retention in porous medium.
  • 2010. Propagation of colloidal dispersion gels (CDG) in laboratory core floods.
  • 2010. Propagation of Colloidal Dispersion Gels (CDG) in Laboratory Corefloods, paper SPE 129927.
  • 2010. Nanosized particles for EOR, paper SPE 129933.
  • 2010. Nano-sized particles for EOR.
  • 2010. Modified synthetic polymers for high salinity and high temperature.
  • 2010. Modeling and statistical analysis of miscible displacement using 1D NMR imaging.
  • 2010. Mechanistic modelling of EOR processes.
  • 2010. Experimental results of low salinity waterflooding combined with surfactant flooding.
  • 2010. Experimental 2D-study of unstable displacements.
  • 2009. Static and Dynamic Adsorption of Salt Tolerant Polymers.
  • 2007. Rheology of microemulsions.
  • 2007. Progress in Immiscible WAG modelling.
  • 2007. Probing the connectivity amongst pores within 1,5” rock core plugs.
  • 2007. Fluid flow properties of different carbonate pore classes correlations to oil recovery.
  • 2007. Features concerning capillary pressure and the effect on two-phase and three-phase flow.
  • 2007. Characterisation of vuggy carbonate.
  • 2007. A rheological study of new generation of sulfonated polyacrylamides as a function of salinity.
  • 2006. Measuring Wettability from Brine T2 Distributions in the Presence of an Inert Mineral Oil.
  • 2018. Simulation of Low Salinity Surfactant Polymer Flooding.
  • 2015. Simulation of Low Salinity Waterflooding and Hybrid EOR.
  • 2015. Simulation of Enhanced Heavy Oil Recovery: History Match of waterflooding and Polymer injection at Adverse Mobility Ratio.
  • 2015. Modelling of Waterflood Hybrid EOR.
  • 2015. History Match of Laboratory Experiments on Low Salinity and Hybrid EOR.
  • 2015. Grid Sensitivity Simulation of Low Salinity and Polymer flooding.
  • 2009. Simulering og Analyse av 3-fase Strømningseksperimenter.
  • 2009. Simulering av flerfasestrømning i porøst medium.
  • 2009. Pore-scale Reconstruction and Network Modeling of Carbonate Material.
  • 2009. Eksperimentell studie av vannbasert EOR i karbonatreservoarer.
  • 2009. Effekt av permeabilitetsvariasjon på vann- olje strømning.
  • 2008. Water-flood Efficiency for different Pore Classes in Carbonate Reservoirs.
  • 2006. Reservoir Simulation for Transition Zone Reservoirs.
  • 2005. Eksperimentelt studie av oljeutvinning i utvalgt kjernemateriale med ulike karbonat poreklasser.
  • 2018. Low Salinity Surfactant Flooding in Sandstone Cores.
  • 2017. Modeling of Polymer Flooding at Adverse Mobility Ratio.
  • 2015. Pore Scale Modeling of Polymer Flow Using the Navier-Stokes Approach.
  • 2015. Experimental Studies of N2- and CO2-Foam Properties in Relation to Enhanced Oil Recovery Applications.
  • 2014. Enhanced Oil Recovery by Combined Low Salinity Water and Polymer Flooding.
  • 2012. Mechanistic Network Modeling of Water-based Enhanced Oil Recovery Method.
  • 2011. Multiphase Flow in Porous Media with Emphasis on CO2 Sequestration.
  • 2011. Characterisation and Representative Elementary Volume for a Vuggy Carbonate Rock.
  • 2009. Waterflood efficiency and single-phase flow properties ofcarbonate porous media.
  • 2009. Network Modelling of Multi-Phase Flow in Porous Media.
  • 2015. Wettability and Oil Recovery by Polymer and Polymer Particles.
  • 2015. Heavy nitrate corrosion in anarobe aquifer injection water biofilm: Process modeling.
  • 2012. Wettability and Oil Recovery by Low Salinity Injection.
  • 2006. Absolute Pore Size Distribution from NMR.

Se fullstendig oversikt over publikasjoner i CRIStin.